Mobile phones forum

please resister and join in our community to share your all!

The most powerful helping forum!


    How to repair keypad problem in china phone

    Share
    avatar
    Admin
    Admin
    Admin

    Posts : 151
    Points : 342
    Reputation : 8
    Join date : 2009-10-26
    Age : 33
    Location : Bangladesh,Comilla.

    How to repair keypad problem in china phone

    Post by Admin on Mon Nov 02, 2009 8:25 am

    How to repair keypad problem in china phone:



    First we need to know china phone keypad connected with PCB how way-

    (A) Direct on PCB

    (B) Flex System (flex cable direct soldering pcb to keypad panel)

    (C) Flex and socket system include (flex one side soldering with key panel other side connect to pcb with socket)

    (D) only Socket System (here have 2 socket, 1 with key panel others with pcb)





    Keypad problem have various type-

    1. All key not work.

    2. some key work and some other not work.

    3. sometimes work and sometimes not work.




    1. All key not work
    china phone all key not work for this type of problem-

    (A) though its touch screen phone, first try to disconnect touch panel line from phone pcb or display flex (4 line)

    (B) though not solve and keypad direct on pcb first you try to good clean full pcb with cleaner.

    (C) though not solve now you try to format/flash your phone because some time key problem come from software problem.

    (D) though still not solve now you check must be CPU. 95% china phone keypad directly going in cpu. and other 5% first going to resistor or capacitor near the cpu or keypad than going to cpu. so now first check them than you can try to re-hot, re-soldering or changing cpu.

    (E) though its flex or socket system, first check GND connection continuslay pcb to key panel. next check full flex or socket all line going continuously pcb to key panel or not. also sometimes flex or socket shorted with other line or gnd so check also them.

    (F) Also you can check all key anyone is short 2 line.

    (G) sometimes keypad line broken from cpu pin on pcb to key panel, so check them.




    2. Some key work and some other not work-
    Some key work and some other is not work for this type of problem-

    (A) maximum time this problem we face for flex or socket system keypad. so check flex cable and socket all line any line is broken or not and though need change them. and check all key connection on key panel.

    (B) though its direact on pcb, some of key line broken internaly. and maximum china phone have alternative test point near every key or with other key on keypad. so check them with multimeter and though need connect to not work key with near testpoint or other working key.

    (C) common problem is keypad metal ball (which is short 2 line on key when we press) sometimes its damage for phone water damage or over key voltage, so clean them or change.

    (D) also try to check line continuously from cpu to not working key.



    3. sometimes work and sometimes not work-
    this problem come from this defect-

    (A) flex or socket system keypad any line is bad soldering or do lose contact. check them and
    re-soldering or keep there line join with extra ware.

    (B) for cpu bad soldering or cpu pin is broken. so re-hot or re-ball cpu.



    I post here keypad common problem solution, hope it will help you to fixing your keypad problem.

    What a Face
    Thanks to all

      Current date/time is Mon Jul 24, 2017 4:43 am