Mobile phones forum

please resister and join in our community to share your all!

The most powerful helping forum!


    How To Repair Dead,Restart,Hang: motorola V3,v400,v300,v600,v500,v180,v220 Solution

    Share
    avatar
    Admin
    Admin
    Admin

    Posts : 151
    Points : 342
    Reputation : 8
    Join date : 2009-10-26
    Age : 33
    Location : Bangladesh,Comilla.

    How To Repair Dead,Restart,Hang: motorola V3,v400,v300,v600,v500,v180,v220 Solution

    Post by Admin on Thu Dec 10, 2009 6:28 pm

    How To Repair Dead,Restart,Hang: motorola V3,v400,v300,v600,v500,v180,v220 Solution


    Some simple tips in repairing Dead,Restart,Hang motorola phones such as V3, v400,v300,v600,v500,v180,v220.

    Dead no power

    First make sure your battery is 100% ok and charger
    If you cant seem to get it to power even with a external power supply
    Wont go to boot mode by pressing (hold and press +and# then power button)
    No responds with charger

    1.Try to boot phone by pressing (hold and press +and# then power button) if its goes to boot mode try to flash phone if not step 2
    2.Try to connect phone to smart-moto and check if phone is in flash mode already thats why it wont turn on
    3.Reheat PA module or remove it and try to turn phone on without PA . if PA is shorted phone wont turn on or no responds at all with any power supply ( some shorted PA cannot be tested by a tester in battery terminal so I recommend that you take PA out , base on my experience )

    Additional info

    Phone turns on then goes off rite away even with a charger
    Phone only turn on with a charger plug in
    Phone chargers but drains rite away

    1.Its 100% PA problem to

    Signal problem

    Signal is good but cant make calls
    Call Failed and cant received calls
    No signal at al

    1.Try to flex or full flash phone if you still get called failed or no signal
    2.Try to reheat PA module if you still get called failed or no signal
    3.Change PA module 100% PA problem , after change PA and still no signal full flash phone with monster pack or any full flash
    4.After that smile your phone is working

    Hang

    1 Try master clear if still hangs
    2.Full factory reset if still hangs
    3.Try full flash phone if still hangs
    4.Reheat PA or remove and observe phone with out PA module faulty PA causes software to hang

    Restart

    Phone restarts by it self , phone restart when making a call or receiving calls

    1 Try master clear if still restarts
    2.Full factory reset if still restarts
    3.Try full flash phone if still restarts
    4.100% faulty PA

      Current date/time is Thu Nov 23, 2017 10:29 pm